Table of Contents
Advertisement
Display
7.1
7.2
The display shows the following information:
7.1: Temperature value
7.2: Temperature icons , Cold
During the washing cycle the display shows the temper-
ature icon animated to indicate that the appliance has
started the heating phase of the water in the tub.
7.3: Spin value
7.4: Spin speed icons.
• No spin
• Rinse Hold
• Night Cycle
During the spinning phase the spiral is animated.
No spin option eliminates all the spin phases and increa-
ses the number of rinses for some programmes.
Rinse Hold: by selecting this option the water of the last
rinse is not emptied out to prevent the fabrics from creas-
ing. When the programme has finished the display shows
three blinking 0.00 , the light of button 8 is off and the
door is locked to indicate that the water must be emptied
out. To empty out the water, please read the paragraph
«At the end of the programme».
Night Cycle: by selecting this option, the machine will not
drain the water of the last rinse, so as not to wrinkle the
laundry. As all spinning phases are suppressed, this
washing cycle is very noiseless and it can be selected at
night or in times with a more economical power rate. On
some programmes the rinses will be performed with more
water. When the programme has finished, the display
shows three blinking 0.00 , the light of button 8 is off and
the door is locked to indicate that the water must be emp-
tied out. To empty out the water, please read the paragraph
«At the end of the programme».
7.5: Automatic Dry Icons
By pressing the button 4 you can choose one of the re-
quired degree of drying for cottons and synthetics:
6
7.3
7.4
7.5
.
7.13
7.12
7.6
7.7
7.8
•
= Extra dry (for Cottons)
•
= Store dry (for Cottons and Synthetics)
•
= Iron dry (for Cottons)
7.6: Child safety lock
graph).
7.7: Selected drying time value
After selecting a drying programme, the drying time is
displayed in minutes or in hours and minutes (max 250
mins). After the programme has started the time remain-
ing is updated every minute.
7.8: Super Quick icon
7.9:
• Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes (for example 2.05). The duration
is calculated automatically on the basis of the maxi-
mum recommended load for each type of fabric. After
the programme has started, the time remaining is up-
dated every minute.
• End of programme
When the programme has finished three flashing zeros
is displayed and the door can be opened.
• Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed
at the bottom of the display for a few seconds and the
integrated red light of button 8 start flashing.
• Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
«What to do if...»).
• Delay Time value
7.10: Extra Rinse icon
7.11: Drying programme phase icons
7.11
7.10
7.9
(see «Personalisation» para-
.
Advertisement
Table of Contents
