Zanussi ZWD 14791 W User Manual page 28

Positioning
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded by carpets,
rugs etc. Check that the machine does not touch the wall
or other kitchen units. Level the washing machine by
raising or lowering the feet. The feet may be tight to adjust
as they incorporate a self locking nut, but the machine
MUST be level and stable. If necessary, check the setting
with a spirit level. Any necessary adjustment can be made
with a spanner. Accurate levelling prevents vibration,
noise and displacement of the machine during operation.
Caution! Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
28
Water inlet
Warning! This appliance must be connected to a
cold water supply.
1. Connect the water inlet hose supplied with the ma-
chine to a tap with a 3/4" thread. Always use the hose
supplied with the appliance.
Important! Do not use the hose from your previous
machine to connect to the water supply.
2. The other end of the inlet hose which connects to the
machine can be turned as showed in the picture.
Do not place the inlet hose downwards.
Angle the hose to the left or right depending on the
position of your water tap.