Horizon Fitness FS 40 Assembly And User's Manual page 8

A SS E MB LY ST EP 
HARDWARE BAG  CONTENTS :
FLAT WASHER (B)
CLEVIS
NYLON NUT (C)
BALL
RUBBER STOP
FLAT WASHER (B)
SCREW (E)
HOOK
GRIP
A Open HARDWARE BAG .
B Remove nylon nut, threaded screw and ball from end of CABLE B.
C Route CABLE B through the pulley system in the RADIAL ARM ASSEMBLY as shown in
diagram.
D After CABLE B routing is complete replace nylon nut, threaded screw and ball on end of
cable.
E Hook HANDLES on to cable using the 2 HOOKS.
14
FS 40 rev 1.0.indd 14-15
CABLE B
Qty: 1
CABLE B
ASSEMBLY STEP 
HARDWARE BAG  CONTENTS :
CABLE C
Qty: 1
SINGLE FLOATING
PULLEY BRACKET
LEG EXTENSION/
CURL DOWN TUBE
CABLE SCREW
CABLE C
FLAT
WASHER (B)
NYLON
BALL
NUT (C)
RUBBER STOP
CLEVIS
FLAT WASHER (B)
SCREW (E)
EXTENSION
HOOK
CABLE
A Open HARDWARE BAG .
B Remove nylon nut, threaded
screw and ball from end of
CABLE C.
C Attach threaded cable end
to SINGLE FLOATING PULLEY
BRACKET.
D Route CABLE C through pulley
system of BASE FRAME up
through the DUAL FLOATING
PULLEY BRACKET and back
to BASE FRAME and CENTER
SUPPORT FRAME as shown in
diagram.
E After CABLE C routing is
complete replace nylon nut,
threaded screw and ball on end
of cable.
F Hook the LEG ExTENSION/CURL
DOWN TUBE to the end of the
cable using the HOOK and the
ExTENSION CABLE.
1
8/20/07 11:37:15 AM