Advertisement
TR O UB L E S H OOTI NG
Your home gym is designed to be reliable and easy to use. However, if you experience a problem, please reference
the troubleshooting guide listed below.
PROBLEM:
The cables feel rough and are noisy during use.
SOLUTION:
Verify the following:
IS THERE ANY NOTICABLE DAMAGE TO THE CABLES?
IF YES:
• Contact customer tech support and replace the cable(s).
IF NO:
• Verify that all cables are secured into the pulleys.
• Verify that the weight stack guiderods are lubricated.
• Verify that there is no excessive slack in the cables.
NOTE: If there is excessive slack adjust cable tension (see next page)
PROBLEM:
Weight selector pin cannot be inserted.
SOLUTION:
Verify the following:
ARE THE HOLES ALLIGNED THROUGH THE WEIGHT PLATE AND BAYONETTE?
IF YES:
• Verify that the selector pin isn't bent or damaged.
IF NO:
• Adjust threaded bolt on top plate so that the holes in the bayonette align with the weight plate.
NOTE: Always maintain at least ½˝ of threaded bolt in bayonette.
If the above troubleshooting section does not remedy the problem, discontinue use.
PLEASE CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer Tech Support to service your home gym they may need to ask detailed questions about the symptoms that are
occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front or the back? What kind of noise is it (thumping, grinding, squeaking,
chirping etc.)?
• Has the machine been lubricated and maintained per the maintenance schedule?
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service necessary
to get you and your Horizon Fitness home gym functioning again!
24
FS 40 rev 1.0.indd 24-25
MAI NTEN AN CE
Cleanliness of your home gym and its operation environment will keep maintenance problems and service calls to a
minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
• Wipe upholstery, handgrips, bars, and frame (if needed) with a mild cleaning solution.
EVERY WEEK
• Lubricate guide rods with a spray or gel silicone lubricant.
• Inspect cable ends and cable insulation for damage.
EVERY MONTH - IMPORTANT!
• Inspect all frame bolts and tighton as needed.
Please contact Horizon Fitness with questions about applying lubricant to your home gym.
ADjUSTING CABLE TENSION
Regularly check the cable tension of your home gym. If excessive slack
exists adjust cable tension by removing the pulley bolts and moving
one or both pulleys to the inner mounting position in the dual floating
pulley bracket and then reinstalling the pulley bolts. Cable tension
may also be adjusted using the threaded cable end on single pulley
bracket and weight stack Twist threaded end to adjust tension and
then tighten lock nut.
NOTE: Always maintain at least ½˝ of threaded bolt in bayonet.
TWIST SCREW TO
CABLE SCREW
ADJUST TENSION,
AND NUT
THEN TIGHTEN
LOCK NUT
SINGLE PULLEY
BRACKET THREAD
INNER
MOUNTING
POSITIONS
TWIST SCREW TO
CABLE SCREW
ADJUST TENSION,
AND NUT
THEN TIGHTEN
LOCK NUT
WEIGHT PLATE
2
8/20/07 11:37:22 AM
Advertisement
