Upc A; Upc A Check Digit; Upc A Number System - Honeywell 3800g User Manual

UPC A

UPC A
* On

UPC A Check Digit

This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not. Default = On.
* On

UPC A Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On
3800g/3800gHD/3800gPDF User's Guide
<Default All UPC A Settings>
Off
Off
Off
7 - 17