Beeper Duration - Good Read; Led - Good Read; Number Of Beeps - Good Read - Honeywell 3800g User Manual

Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the imager emits on a
good read. Default = Normal.
* Normal Beep
Short Beep
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On.
* On
Off
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good
read. For example, if you program this option to have five beeps, there will be
five beeps and five LED flashes in response to a good read. The beeps and
LED flashes are in sync with one another. To change the number of beeps,
scan the bar code below and then scan a digit (1-9) bar code and the Save bar
code on the Programming Chart inside the back cover of this manual. Default =
One.
Number of Pulses
3 - 2 3800g/3800gHD/3800gPDF User's Guide