Plug And Play; Connecting The Imager When Powered By Host (Keyboard Wedge) - Honeywell 3800g User Manual

ACK/NAK Mode
On
* Off

Plug and Play

Plug and Play bar codes provide instant imager set up for commonly used inter-
faces.
Note: After you scan one of the codes, power cycle the host terminal to have
the interface in effect.
Connecting the Imager When Powered by Host
(Keyboard Wedge)
An imager can be connected between the keyboard and PC as a "keyboard
wedge," plugged into the serial port or connected to a portable data terminal.
The following is an example of a keyboard wedge connection:
1. Turn off power to the terminal/computer.
2. Disconnect the keyboard cable from the back of the terminal/computer.
1 - 4 3800g/3800gHD/3800gPDF User's Guide