Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Problem
No Power
No Live Video
Live Video Very Bright
DVR has stopped recording
The icon
however, the DVR is not
recording.
Document 800-00918 Rev F
02/08
Possible Solution
•
•
•
•
•
•
If a cable is attached to the Loop connector, make
certain it is connected to a properly terminated
device.
If hard disk drive is full, you will either need to delete
video or set the DVR to the Overwrite Mode.
displays,
When the DVR is in the Pre-Event recording mode,
the yellow
event, and the DVR is not recording. The red
starts recording.
Check power cord connections.
Confirm that there is power at the outlet.
Check camera video cable and connections.
Check monitor video cable and connections.
Confirm that the camera has power.
Check camera lens settings.
and
display when there is no
display when any event occurs and the DVR
E
and
143
Advertisement
Table of Contents
