4909 CPVC Conductivity Cell Insertion/Removal Assembly Operations Manual
* Automatic Temperature Compensator,
when specified by catalog number, is
mounted inside adapter.
Apply teflon tape to
both ends of support
tube. Tighten all pipe
thread fittings two turns
beyond hand tight.
4
4909 CPVC Conductivity Cell Insertion/Removal Assembly– Operations Manual
Conductivity
Cell
Adapter *
Figure 1-4 4908 Conductivity Cell
Do not nick
outside of
support tube
Tighten securely to pipe
*
Figure 1-5 31074357 Removal Device
Note: Apply a thin film of Silicone grease
to all surfaces of bushing and to
diameter of support tube as shown.
Apply grease
(See Note above)
These parts should be
hand-tightened only
Slice through one
side as shown
Compression
Bushing
Cable
a/n 23352
Modify per sketch*
a/n 23353
7/99