Three Chassis; Figure 2-4 Connecting Communication Signals Between Three Chassis - Honeywell VideoBloX User Manual

Three Chassis

MASTER CHASSIS
CPU Module
Video Input Modules
Interlink Input Modules
Video Output Modules
Comms
Control
Rev 1.0
Using straight through cables with Female DB9 connectors on each end
1. Connect the Control Connector on the first (master) chassis to the Comms connector
on the second chassis (first slave chassis).
2. Connect the Control Connector on the second chassis (first slave chassis) to the
Comms connector on the third chassis (second slave chassis).
3. Connect the Control Connector on the third chassis (second slave chassis) to the
Comms connector on the first chassis (master chassis).
Figure 2-4 Connecting Communication Signals between Three Chassis
FIRST SLAVE CHASSIS
Video Input Modules
Interlink Input Modules
Video Output Modules
No CPU module required
VideoBloX Chassis Only User Manual
Comms
Control
13
SECOND SLAVE CHASSIS
Video Input Modules
Interlink Input Modules
Video Output Modules
No CPU module required
Comms
Control
900.0855
10/06