Recommended Cutting Attachments; Cutting-Line Heads And Shields - Honda HHT31S Owner's Manual

RECOMMENDED CUTTING ATTACHMENTS

CUTTING-LINE HEADS AND SHIELDS

A cutting-line head containing nylon
monofilament line, and a debris shield with cutoff
knife is standard equipment. The shield's cutoff
knife automatically removes any excess line that
is released from the cutting head.
Honda HHT31SUNBA model trimmers are
supplied with two different debris shields. Use the
debris shield with the cutoff knife when the
cutting-line head is installed.
Nylon monofilament line is suitable for cutting
grass and ordinary weeds, but not brush and
woody growth.
Manual-Feed Cutting-Line Head
Line is released from the cutting head by
manually pulling and turning the spool with the
trimmer engine stopped.
Semi-Matic (bump-feed) Cutting-Line Head
Line is released from the cutting head by
bumping the spool on hard ground while head is
spinning. Do not tap the cutting-line head on
pavement or concrete.
CUTTING-LINE HEAD
CUTOFF KNIFE
(inside debris shield)
MANUAL-FEED CUTTING-LINE HEAD
HOUSING
SEMI-MATIC (bump-feed) CUTTING-LINE HEAD
HOUSING
NYLON MONOFILAMENT LINE
DEBRIS SHIELD
To release more line,
pull spool and turn
counterclockwise.
SPOOL
SPOOL
7