CUTTING-LINE HEADS AND SHIELDS
A cutting-line head containing nylon
monofilament line and a debris shield with a
cutoff knife is standard equipment. The shield's
cutoff knife automatically removes any excess
line that is released from the cutting head.
The U-type handlebar trimmers are supplied with
two different debris shields. Use the debris shield
with the cutoff knife when the cutting-line head is
installed.
Nylon monofilament line is suitable for cutting
grass and ordinary weeds, but not brush and
woody growth.
Manual-Feed Cutting-Line Head
Line is released from the cutting head by
manually pulling and turning the spool with the
trimmer engine stopped.
Semi-Matic (bump-feed) Cutting-Line Head
Line is released from the cutting head by
bumping the spool on hard ground while the head
is spinning. Do not tap the cutting-line head on
pavement or concrete.
RECOMMENDED CUTTING ATTACHMENTS
CUTTING-LINE HEAD
CUTOFF KNIFE
(inside the debris shield)
MANUAL-FEED CUTTING-LINE HEAD
HOUSING
SEMI-MATIC (bump-feed) CUTTING-LINE HEAD
HOUSING
NYLON MONOFILAMENT LINE
DEBRIS SHIELD
To release more line,
pull the spool and turn
it counterclockwise.
SPOOL
SPOOL
7