Table of Contents
Advertisement
W Cutter
deck lift rod
-
1. The cutter
deck lift rod can be adjusted
in the same manner
as the
cutter
deck plate (step-5).
After
adjustment,
tighten
the lock nuts
and lock the adjust
pins
securely.
-
2. Do not adjust the cutter deck lift rod less than 367 mm (14.5
in.) for
the first time.
If the height of the cutter deck is below
115 mm (4.5
in.) with the cutter deck lift rod being 367 mm (14.5
in.), then adjust
the height
with the cutter
deck lift plates.
-
3. Adjust
the cutter
deck lift plates if the cutter
deck fails to reach the
desired
height.
If it still fails to reach the desired height, then adjust the length of the
cutter
deck lift rod.
n
Lift link rod
Check
that
the
distance
between
the end
of the
rod
and the
bottom
washer
is 40 mm (1.6
in.). To adjust,
loosen the lock nut and turn the ad-
just nut. After
adjustment,
retighten
the lock nut securely.
ROD STOPPER
DAMPER
SPRING
ADJUST
NUT
LOCK NUT
PIN
28
Hide quick links:
Advertisement
Table of Contents
