Installation - Honda H5518 Operator's Manual

3. Installation of front tensioner bracket
-
1. Remove and retain the lower cover 6 by removing the 8 x 16 mm
flange bolts.
FLANGE BOLTS
8xl6mm
LOWEk COVER B
-
2. Install the drive pulley on the front P.T.O. shaft using an 8 x 20 mm
special flange (shouldered) bolt. Tighten the bolt to the specified
torque.
Torque specification: 2.2 kg-m (16 ft-lb)
DRIVE &JLLEY
SPEClAi FLANGE
BOLT 8 x 20 mm
13