Honda H5518 Operator's Manual page 16

-
3. Position the front tensioner bracket on the frame and install using
two of the bolts removed in Step 1 and the two shouldered tensioner
bracket bolts, Tighten the bolts to the specified torque while holding
the front tensioner bracket firmly against the frame. Retain the re-
maining four bolts.
Torque specification: 2.2 kg-m ('I6 ft-lb)
FLANGE BOLTS
8xl6mm
FRONT TENSIONER BRACKET
-4
TENSIONER BRACKET
FLANGE BOLTS 8 x 16 mm
(Shouldered)
Insert the end of the tensioner spring into the hole in the tensioner
arm. Hook the other end into the frame tab as shown.
14