Honda H5518 Operator's Manual page 25

- 3. Position the V belt driven stopper (belt stopper A) on the frame and
install using 10 x 20 mm flange bolt and 8 x 16 mm flange bolt.
Tighten the bolt to the specified torque.
Torque specifications:
10 mm flange bolt:
4.0 kg-m (29 ft-lb)
8 mm flange bolt:
2.2 kg-m (16 ft-lb)
V-BELT DRIVEN STOPPER
(BELT STOPPER A)
FLANGE BOLT
- 4. Install the belt stopper collars and 8 x 45 mm flange bolts on each
side of the frame. Tighten the bolt to the specified torque.
Torque specification: 2.2 kg-m (16 ft-lb)
BELT STOPPER COLLAR 8x45mm
FLANGE BOLT
23