Table 4-8 Blinding Threshold Values - Honeywell HCD5HIH Reference Manual

IP Camera Web Client
56
Note To turn off video blur detection, select Disable in the Blur Threshold list.
Disable is the default value.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Configuring Camera Blinding Detection
An obstacle in front of the camera lens can blind the camera. When this occurs, camera
blinding is detected and an alarm message appears above the video display (see
Figure 4-14). To detect camera blinding:
1. Click the Video Analytics tab.
2. In the Blinding Threshold list, select one of the following options:
Table 4-8 Blinding Threshold Values
Value
High (80%)
Medium (50%)
Low (30%)
3. Click Apply.
Note To turn off camera blind detection, select Disable in the Blinding Threshold
list. Disable is the default value.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
To detect ...
Maximum blinding. The alarm message appears when your
camera is blinded by 80% or more.
Medium blinding. The alarm message appears when your
camera is blinded by 50% or more.
Minimum blinding. The alarm message appears when your
camera is blinded by 30% or more.