Figure 3-4 Setting The Ip Network Settings Automatically Or Manually; Table 3-4 Ip Network Device Setting Options - Honeywell HCD5HIH Reference Manual

Option
Device Name
IP Address
Subnet Mask
Default Gateway
MAC Address
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide
Table 3-4 IP Network Device Setting Options
Description
By default, the device name is the device type plus the MAC Address. Honeywell
recommends, for security, that you change the device name.
The IP address of the device on the network.The camera obtains an IP address
by static or dynamic (automatic) means. There are two ways: Dynamic
(DHCP/APIPA), which is automatically assigned by the network administrator, or
Static (static), which is assigned by the user.
The subnet mask, or netmask, value of the device on the network. IP networks
can be divided into several smaller networks by subnetting. When a network is
subnetted, you must specify a subnet mask, which tells network devices which
smaller network they belong to.
Note If the subnet mask is not properly configured, the camera might not be
able to communicate with other devices on the network.
The default gateway address that connects the device to the network. Enter the
IP address of the host to use as a gateway between networks. The gateway
allows communication between devices that are on different networks. Without a
correct gateway setting, the camera cannot receive or transmit data from or to
devices that are not in the same network address range.
The MAC address is a factory-assigned address that is unique for each device.
Figure 3-4 Setting the IP Network Settings Automatically or Manually
Note All examples in this User Guide show the GUI for the HCD5MIH model
camera, unless otherwise specified.
Click to clear this checkbox and
manually set the network details
33