Table of Contents
Advertisement
Installing the Honeywell IP Utility and Web Client Software
Step 2: Install the Honeywell IP Utility Software
28
1.
Close all other applications that might be open on your computer.
Note
We recommend that you disable any Norton AntiVirus software that might be
running on the workstation.
2.
Disable User Account Control (UAC) Settings (for Windows 7 and Windows 2K8 only).
If you do not disable UAC, you will be unable to install the ActiveX software.
a.
Go to Getting Started
b.
Change the UAC setting to Never Notify.
c.
Click OK to save the new setting.
3.
Open the Honeywell IP Utility InstallShield Wizard.
Method 1: DVD
Insert the DVD into the DVD-ROM drive.
Note
If InstallShield does not open automatically, navigate to [DVD
drive]\Honeywell IP Utility\Honeywell IP Utility Setup.exe. Double-click on
the file to launch the program.
Method 2: Website
a.
Navigate to www.honeywellvideo.com.
b.
Click Customer Resources
page.
Note
You will need a Username and Password to log in to the Download Center. To
recieve a Username and Password, contact the customer service center for
your region. Contact information is found on the Download Center page.
c.
Log into the Download Center.
d.
Click Cameras under Video Systems Products.
e.
Under Honeywell IP Utility, download, extract and click to download the latest
Honeywell IP Utility Set-up software.
4.
When the Honeywell IP Utility InstallShield Wizard opens, follow the instructions.
After the installation is complete, a Honeywell IP Utility icon
desktop.
Change UAC Setting.
Download Center to reach the Download Center
displays on the
Advertisement
Table of Contents
