Enable HTTP
Server must be
enabled. If it isn't,
the Launch
Browser button
might not be
available.
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP
Series True Day/Night Network Box Camera Reference Guide
5.
In the Discovery pane, double-click the device you want to connect to.
-OR-
Select the device and click Connect
The network settings for the connected device are displayed in the System pane.
6.
Click Launch Browser (see
Figure 4-1
Launching the Web Client from the IP Utility
Note
All examples in this User Guide show the GUI for the HCD5MIH model
camera, unless otherwise specified.
Note
If the Launch Browser button is inactive, then you must enable Enable HTTP
Server. Click to enable the HTTP Server, and then click Apply. The Launch
Browser button should then be enabled.
.
Figure
4-1) to go to the web client logon page.
Connect to the device then click
Launch Browser
41