Audio & Video Settings - NETGEAR NeoTV NTV200 User Manual

Audio & Video Settings
Select Settings > Audio & Video to display the following screen:
Digital Output
Select the digital output setting for the audio. If you connect the NTV200 TV directly through
HDMI cable, select PCM stereo. If you connect the NTV200 to an A/V receiver cable, see the
following table.
Table 2. Digital Output settings with an A/V receiver
NTV200 connection Receiver decodes Dolby Digital or
SPDIF cable
SPDIF cable
HDMI
TV Resolution
Select the resolution for your TV. The following table describes the available settings.
TV Resolution
setting
HDMI Auto
1080p
1080i
NeoTV Streaming Player (NTV200)
Dolby Digital Plus
Yes
No
N/A
HDMI TV
The NeoTV Streaming Player automatically sets the correct resolution for
your HDTV.
Your TV is a high-definition TV (HDTV) capable of 1080p (any frame rate).
Your TV is a high-definition TV (HDTV) capable of only 1080i.
Settings
Setting
Bitstream Legacy
PCM Stereo or PCM 5.1 (depends on
the number of speakers)
Bitstream HD
22