NETGEAR NeoTV NTV200 User Manual page 23

TV Resolution HDMI TV
setting
720p Your TV is a high-definition TV (HDTV) capable of only 720p.
TV Aspect
Select the aspect ratio. If your TV has a very rectangular (widescreen, or 16:9) aspect ratio,
you can select either full screen or pillarboxed). The following table describes these settings.
Media
Movie in widescreen format
HD video in widescreen
format
SD (4.3) TV episodes
Cropped movie (movie put on
disk in 4:3 aspect ratio)
CEC Support
The CEC (Consumer Electronics Control) option allows the TV remote control to control
certain functions of the NeoTV Streaming Player and for the NeoTV Streaming Player to
control certain functions of the TV.
Not all TVs are compatible with your NeoTV Streaming Player's
Note:
CEC control.
If you press the Power button on the NTV200 remote control to wake up the NeoTV
Streaming Player, if the TV is in standby mode, the TV also wakes up.
Your TV uses CEC to control the NeoTV Streaming Player in the following ways.
Pressing the TV Power button to power down or go to standby mode, places the NeoTV
•
Streaming Player in standby mode.
The NeoTV Streaming Player becomes a TV CEC device.
•
Certain TV remote controls can operate the NeoTV Streaming Player through CEC (such
•
as Up, Down, Left, Right, and OK).
NeoTV Streaming Player (NTV200)
16:9 Full
• 4:3 video sources are stretched
horizontally to fit the entire screen.
• Selecting a 4:3 aspect ratio setting
when resolution is set to 720p or
1080i/p has no ef fect.
The episode fills the entire screen.
The episode is stretched horizontally to
fit the entire screen.
The movie is stretched horizontally to
fit the entire screen.
Settings
23
16:9 Pillarboxed
4:3 video sources are shown in center
of the screen; vertical bars are on the
sides of the screen.
No effect. The episode fills the entire
screen.
The episode is shown in the center of
the screen with vertical bars on the
sides of the screen.
The movie is shown in the center of the
screen with vertical bars on the sides of
the screen.