Specifying The Wireless Location; Setting A Static Ip Address; Video Settings - NETGEAR MP115 User Manual

User's Manual for the Wireless Digital Media Player MP115
6. The WEP Security screen will now be displayed. Detailed instructions for configuring WEP
can be found in Appendix B, "Wireless Networking
7. The system reboots and connects to the selected wireless network.

Specifying the Wireless Location

You can specify the country where your wireless network operates.
1. Push Settings on the remote control to go to the Settings menu.
2. From the Settings menu, select Network, and then select Wireless.
3. Select Location, and choose the correct location for your network.
4. Click Apply to save the setting.

Setting a Static IP Address

The MP115 is set up to use DHCP. With DHCP, the MP115 get its IP address from a DHCP server
on the network. If your network does not use DHCP, then you need to change the MP115 settings
to a Static IP Address, and set the IP Address to a subnet within the correct range for your network.
1. Push Settings on the remote control to go to the Settings menu.
2. From the Settings menu, select Network, and then select IP Address.
The Settings: Network:IP Address screen appears.
3. Select Static.
4. Use the number buttons on the remote control to enter the IP Address. Use the OK button to
save each number and move to the next field.
5. After the IP address is set, enter the subnet mask.

Video Settings

Use the Video Settings menu to set the TV Aspect Ratio, Video Mode, or Video Output.
Setting the TV Aspect Ratio
You can set the Aspect Ratio to Letter Box, Full Screen, or 4:3.
1. Push the Settings button on the remote to go to the Settings menu.
5-4
November 2004 202-10038-01
Basics".
Settings and Maintenance