Reset Button - NETGEAR NeoTV NTV200 User Manual

Wireless Connection
If you are using a wireless connection, place your player within range of your wireless
network. For best wireless reception, avoid enclosing your player in a cabinet.
Figure 3. Wireless network connection
If you do not receive a strong signal during the onscreen setup, rotate your player or move it
closer to your router.

Reset Button

There is a Reset button on the bottom of the NeoTV Streaming Player. You can use the Reset
button to go to standby mode.
Press Reset once and the NeoTV Streaming Player goes to standby mode. Press Reset
•
again to wake up the NeoTV Streaming Player.
To reboot, press and hold Reset for 6 seconds. The unit power cycles.
•
NeoTV Streaming Player (NTV200)
Wireless router
Getting Started
10
To connect wirelessly, you can use
Wi-Fi Protected Setup (WPS), or you
can select your network and enter
its password using the onscreen
setup guide.
NeoTV200