Onscreen Quick Setup - NETGEAR NeoTV NTV200 User Manual

Onscreen Quick Setup

Onscreen Quick Setup makes it easy to get started with the NeoTV Streaming Player.

To use Quick Setup:
After you connect your NeoTV Streaming Player, press Power on the NeoTV remote
1.
control to turn it on.
You might need to use your TV remote control to select the HDMI input on your TV where
2.
you connected the NeoTV Streaming Player.
The NeoTV Quick Setup Welcome screen displays.
Follow the onscreen setup instructions to select the following:
3.
TV resolution. This is the output resolution to the TV.
•
Standby timing. Select the number of minutes that the NeoTV Streaming Player
•
waits to display a screen saver when media is not playing.
WiFi network. Select your home network. If you connected an Ethernet LAN cable,
•
you are not prompted to select a WiFi network. You can use one of the following
methods.
Select your WiFI network. The NTV200 displays a list of networks in your area.
-
Select the one that you want to join.
Connect using WPS. When prompted, press the WPS button on your router to
-
join your network without typing the network password.
Connect manually. Use the onscreen keyboard to type the name of the network
-
and its WiFI password.
The NeoTV Streaming Player checks for software updates.
•
NeoTV Streaming Player (NTV200)
Getting Started
13