Changing From Composite Video Cable To Hdmi Video Cable - NETGEAR Digital Entertainer Express EVA9100 User Manual

Changing from Composite Video Cable to HDMI Video Cable

This section explains what to do if you installed the Digital Entertainer Express with the composite
video cable that came in the package and now want to install an HDMI cable (sold separately).
Your television must support an HDMI connection.
If the Digital Entertainer Express is connected with both a composite video cable and an
HDMI video cable, it will communicate via the HDMI cable, but unless the television is
in HDMI mode you will not see a video display on the television screen.
To change from composite video cable to HDMI video cable:
1. Connect the HDMI cable from the Digital Entertainer Express to your television.
HDMI cable (not included in the package)
Figure 6-3
2. Change the video mode for your television from AV to HDMI. If you are not sure how to do
this, check the documentation that came with your television.
3. You may disconnect the composite video cable if you wish.
Maintenance and Troubleshooting
Digital Entertainer Express EVA9100 User Manual
v1.0, October 2009
6-3