Makita 4334D Instruction Manual page 9

(1)
1
1. Blade installing lever
(3)
(2)
(4)
1
(5)
1. Blade installing lever
1
(6)
1. Blade installing lever
1. Base
2. Anti-splintering device
Removal
002719
1. Push the blade installing lever in the (1) direction to release it.
2. Pull the blade installing lever in the (2) direction until it stops with a little
002720
click. If you have difficulty pulling it out, try to do so while moving it back
and forth in the (3) direction.
3. Rotate the blade installing lever in the (4) direction and remove the blade.
4. Rotate the blade installing lever in the (5) direction until it stops.
002724
5. With the blade installing lever held in this position, push it in the (6) direc-
002723
tion. Then rotate the blade installing lever to its original position.
Anti-splintering device
002734
For splinter-free cuts, the anti-splintering device can be used. To install the
anti-splintering device, move the base all the way forward and fit it into the
base from the back of base.
1
NOTE:
• The anti-splintering device cannot be used when making bevel cuts.
2
9