Advertisement
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released. Pulling the
trigger hard when the lock off button is not pressed causes switch damage.
To start the tool, simply push the lock off
button then pull the trigger. Release the
trigger to stop.
Lock-off
button
Switch
trigger
Cutting operation
CAUTION:
Check carefully that the blade is adequately secured in position before inserting the bat-
terv into the tool
Turn the tool on without the blade making
any contact. Rest the base flat on the work-
piece and gently move the tool forward
along the previously marked cutting line.
CAUTION:
I
Cutting line
*Always hold the tool with the base flush with the workpiece. Failure to do so may cause
*Advance the tool very slowly when cutting curves or scrolling. Forcing the tool may
a slanted cutting surface and blade breakage.
cause a slanted cutting surface and blade breakage.
10
Advertisement
