Table of Contents
Advertisement
10. Troubleshooting
No display.
•
Check connection of the battery.
•
Install the handset in its cradle to charge the battery.
•
Remove the battery from the handset, reinstall it and switch on the hand-
set.
The battery is empty.
•
Check connection of the battery.
•
Clean the charge contacts on handset and base set.
•
Recharge the battery.
The battery indicator shows a weak battery and the handset emits the inter-
mittent warning tone.
•
Recharge the battery of the handset.
The handset does not find the base.
•
You are out of range, go nearer to the base.
•
Check the power supply of the base.
•
Subscribe the handset to a base set following the subscription procedure.
•
Remove the battery from the handset, reinstall it and switch on the hand-
set.
•
Disconnect the adaptor from the base set and reconnect it.
No dial tone.
•
Check connection of the telephone line cord to the base set.
•
Increase the speaker volume of the handset.
No dialling.
•
The number you have dialled is barred.
You have forgotten your PIN code.
•
Perform a full reset of the handset.
Bad voice quality (Birdy Voice only).
•
Repeat what you have said speaking more slowly and close to the micro-
phone.
46
Advertisement
Table of Contents
