Table of Contents
Advertisement
The presentation of date and time of incoming messages is independent of that
of the call log.
If you do not set the day and time before taking the unit into use, the incom-
ing messages will have no time stamp or a wrong one.
b) Checking
1. Press the program key
tion mode.
2. Shortly press numerical key 9
3. The phone repeats the newly programmed day and time setting.
8.16 Remote Control
You can remote control your answering machine with a DTMF phone. If the
phone you are using is not a DTMF phone, you have to use a beeper (option).
1. Dial your telephone number.
2. The answering machine answers your call, you will hear the outgoing mes-
sage followed by a beep.
3. Slowly dial your security code (default 321 or your own).
4. You will hear two confirmation beep tones.
5. Slowly enter the control code corresponding with the wanted function.
6. After executing the command, you will hear a beep and the answering
machine will wait for another control code.
NOTE: You have 10 seconds to enter your security code, otherwise the answer-
ing machine will automatically break the communication.
8.17 Remote Control Codes
Message Playback
•
Enter code 2.
During Message Playback
•
Enter code 2 to pause during message playback.
•
Enter code 2 to continue message playback.
•
Enter code 3 to play back the next message.
•
Enter code 11 to play back the previous message.
•
Enter code 1 to play back the present message again.
•
Enter code 6 to end playback.
(4) twice to access answering machine opera-
.
43
Advertisement
Table of Contents
