Removing A Handset From A Base Set - AEG Birdy Operating Manual

10. The RFPI code of the base set is displayed and the handset emits a tone
when it recognises the base.
11. Press the program key
12. PIN is displayed.
13. Enter the 4 digits of the PIN code of this base (default 0000) by pressing the
numerical keys.
14. Press the program key
15. The handset is subscribed to this base.
b) Subscribing the Handset to Another (GAP compatible DECT) Base
1. The handset is in standby (no tone).
2. Read the Operating Guide of your base to set it to subscribing mode.
3. Continue from item 4 under a) above.
3.9

Removing a Handset from a Base Set

A handset can be deprogrammed from a base set. This feature enables you
to remove a defective handset and to replace it by a new one.
NOTE: You can only remove a handset from a base set with another handset
that is subscribed to the same base.
1. The handset is in standby (no tone).
2. Press the program key
3. Press the arrow down
played.
4. Press the program key
5. DATE/TIME is displayed.
6. Press the arrow down
played.
7. Press the program key
8. PIN is displayed.
9. Enter the PIN code by pressing the numerical keys.
10. Press the program key
11. REMOVE HS
12. Enter the number of the handset (HS1 to HS5) you want to remove by
pressing the numerical keys.
13. Press the program key
14. REMOVE HS is displayed, then the selected handset is removed.
12
(4).
(4).
(4).
(11) or arrow up
(4).
(11) or arrow up
(4).
(4).
is displayed
—
(4).
(3) key until SETTING is dis-
(3) key until REMOVE HS is dis-