Basic Phone Features; Adjusting The Display Contrast - Cisco 7960 User Manual

Basic Phone Features

Adjusting the Display Contrast

Cisco 7960/7940 Telephone User Guide
620-05600070B
NOTE: This chapter may cover more than one version of Cisco 7960 phone (SCCP or
MGCP). Although the chapter applies to all types, some information may apply
only to a certain phone configuration. The user is alerted to these differences by
an icon which is shown at left. The icon appears in the left margin next to where
the information differs. For how to identify your phone configuration, see
"Identifying Your 7960 Telephone Type" on page 4.
Depending on your ambient lighting and viewing angle, you may need to adjust the
display contrast to achieve optimum visibility of your LCD display. To adjust the
display contrast, follow these steps:
1. Press the settings button.
2. Select the Contrast option.
a. On the 7960 MGCP and 7960 SCCP without an expansion module, use
the up and down arrow scroll keys to highlight Contrast, or press 1 on
your keypad.
b. On the 7960 SCCP with an expansion module, do one of the following:
•
Use the up and down arrow scroll keys to highlight Base Phone, or
press 1 on your keypad.
•
Use the up and down arrow scroll keys to highlight Expansion
Module(s), or press 2 on your keypad.
NOTE: If you press a number key in step two, go to step four.
3. Press the Select soft key.
4. Press and release the Up and Down soft keys to reach the desired contrast
level.
NOTE: On the 7960 SCCP, the VOLUME up and down arrows may also be used.
5. Press the Ok soft key to approve the changes.
6. Return to the standard call screen.
2
Basic Phone Features 7