Silencing Announcements - Cisco 7960 User Manual

Silencing Announcements

Cisco 7960/7940 Telephone User Guide
620-05600070B
You may not wish to hear the repeating announcements that "you are the first
caller" or "the conference will start soon". Dialing #2 will toggle the current
announcement with silence.
To disable the announcement or revert to the announcement, press #2.
Silence will end under the following conditions:
When...
You dial #2.
The conference
reservation state changes
from Starts Soon to Active.
The conference
reservation state changes
from Starts Soon to Active.
The conference
reservation state changes
from Active to Ends Soon.
Another participant joins
the conference.
You are the moderator.
The Start Soon
announcement was playing
when silence was started.
The conference bridge
state changes for some
reason.
And if...
N/A
You are the only caller
connected to the
conference.
There are additional callers
connected to the
conference.
You are the moderator and
only caller connected to the
conference.
You were listening to the
First Caller announcement
when silence was started.
You perform any floor
control operation.
The moderator mutes or
unmutes you.
N/A
System Telephone Features
Joining a Meet-Me Conference
Then
You hear the
announcement that was
playing at time silence was
started
You hear the First Caller
announcement.
You are connected to the
conference.
You hear the Ends Soon
announcement.
You will be connected to
the conference.
You will be prompted with
the appropriate
announcement and
connected to the
appropriate announcement
based on the conference
state.
You will hear the Starts
Soon announcement.
You will hear the Starts
Soon, First Caller or Ends
Soon announcement
depending on the
conference reservation
state.
49