NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Select Guest Network from the Setup menu. The Guest Network Settings screen
1.
appears
.
Figure 3-1
Select any of the following Wireless settings:
2.
Enable Guest Network – When this check box is selected, the guest network is enabled,
•
and guests can connect to your network using the SSID of this profile.
Enable SSID Broadcast – If selected, the Wireless Access Point broadcasts its name
•
(SSID) to all Wireless Stations. Stations with no SSID can adopt the correct SSID for
connections to this Access Point.
Allow Guest to access MY Local Network – If selected any user who connects to this
•
SSID can access local networks associated with the router like users in the primary SSID.
Give the wireless network a name.
3.
The name is case-sensitive and can be up to 32 characters. The same name must be
4.
assigned to all wireless devices in your network. NETGEAR recommends that you
change the name to a different value.
Select a Security option from the list.
5.
Click Apply to save your selections.
6.
Chapter 3. Wireless Settings
| 39