Setup Wizard; Manual Setup (Basic Settings) - NETGEAR JWNR2000v2 User Manual

NETGEAR N300 Wireless Router JWNR2000v2 User Manual
If you are not connected to the Internet and select a language that is
Note:
not stored in flash memory, your selection may fail. If you see a
"download fails" message after your language selection, make sure
you are connected to the Internet and make your selection.

Setup Wizard

If you do not use the Smart Wizard on the Resource CD, you have to log in to the router to set
the country, language, and Internet connection.
If you performed the NETGEAR Genie setup, the country, language,
Note:
Internet, and wireless network settings are already configured.
Select Setup Wizard from the top of the router menus.
1.
Select either Yes or No, I want to configure the Router myself. If you select No, proceed
2.
to

Manual Setup (Basic Settings)

If you selected Yes, click Next.
3.
With automatic Internet detection, the Setup Wizard searches your Internet connection
for servers and protocols to determine your ISP configuration.
Manual Setup (Basic Settings)
The Basic Settings screen displays when you select No. I want to configure the Router
myself in the Setup Wizard and is also available from the router menus. It is where you view
or change ISP information. The fields that display vary depending on whether or not your
Internet connection requires a login.
Select Set Up > Basic Settings and select Yes or No depending on whether or not
1.
your ISP requires a login.
shows both forms of the Basic Settings screen.
login.
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, as needed.
•
Enter the settings for the IP address and DNS server.
2.
If no login is required, you can specify the MAC Address setting.
3.
Click Apply to save your settings.
4.
Click Test to test your Internet connection. If the NETGEAR website does not appear within
5.
1 minute, see
Troubleshooting
on page 23.
Figure 3, Basic Settings screen without (left) and with (right)
on page 87.
Chapter 2. Router Internet Setup | 23