Grizzly G0632 Owner's Manual page 9

A. Front Belt Access Panel—Remove this panel to access the drive belt and pulleys for changing speed
ranges.
B. RPM Readout—Shows spindle RPM.
C. Emergency Stop Button—Disconnects power to the motor when pushed in. Rotate clockwise to let it
pop out and reconnect power to the motor.
D. REV/FWD Switch—Used to reverse the spindle direction.
E. Variable Speed Dial—Varies the spindle speed from 0 RPM's to the upper limit for the selected RPM
range.
G0632 16" x 42" Variable Speed Wood Lathe
A
Figure 3. Model G0632 control panel.
NOTICE
The frequency inverter controls on the rear
of the headstock have no effect on the oper-
ation of the lathe. Opening the frequency
inverter will void the lathe warranty and
could seriously damage the lathe. DO NOT
open the case of the frequency inverter.
B
C
D
E
-7-