Monitor Operation Mode; Dvr Operation Mode - Honeywell HEGS5BLX User Manual

3.4 MODES OF OPERATION, CONTINUED
3.4.1 Camera Operation Mode, Continued
Storing Presets
Should the PTZ unit be equipped with a feedback system, then it is possible to store and
recall PTZ preset positions. To store a position move the PTZ to cover the required
scene. Press "Alt" and the "Preset/Save " button. Enter the required preset number using
the numeric keyboard and then press "Enter" to store the position with that number.
Press CLR (Clear) to abort this operation.
Recalling Presets
To recall a previously stored position, press the "Preset/Save" button. Enter the required
preset using the numeric keyboard and press "Enter" to recall the preset. Pressing CLR
(clear) aborts this operation. To step through successive preset positions, press the
"Preset" button and then cycle through positions using the + (next) and – (previous)
keys.
Auxiliary Functions
If the protocol selected in the HVBPIT44 provides additional PTZ functions through
auxiliary keys, press the AUX button (while in Camera Mode) then the appropriate
auxiliary key (AUX1 – AUX8) to perform the function as defined in the HVBPIT44 user
manual. To lock the controller in PTZ auxiliary mode, press the AUX key twice (AUX LED
lit). To unlock auxiliary mode, press the AUX key again (AUX LED is not lit).

3.4.2 Monitor Operation Mode

In this mode of operation, the numeric keypad selects the active monitor. Alt+ joystick
left and Alt + joystick right simulates "Previous" and "Next". Alt + joystick up selects the
next camera to the currently selected monitor. Alt + joystick down selects the previous
camera to the currently selected monitor.
If you press numeric keys, clear, or back followed by the enter key, after pressing the
monitor key (entering monitor mode), the controller automatically returns to camera
mode. If any other keys are pressed this 'auto return to camera mode' function does not
operate and you must change modes manually.
3.4.3 Device (DVR) Operation Mode
In this mode of operation, the numeric keypad selects the active device. To scroll
through the devices (DVRs, VCRs, MUXes, etc.) defined in the VideoBlox configuration,
continue pressing the DVR key.
The device dependent keys (play, stop, pause, etc.) cause the various functions of the
device (DVR/VCR) to be invoked.
The auxiliary device (DVR) functions are defined by the device database selected in the
VideoBloX configurator. To perform an auxiliary device function using the auxiliary keys,
press the AUX button (while in device mode) then the appropriate auxiliary key (AUX1 –
AUX8) to perform the function as defined in the device database. To lock the controller
in device (DVR) auxiliary mode, press the AUX key twice (AUX LED lit). To unlock device
(DVR) auxiliary mode, press the AUX key again (AUX LED is not lit).
Rev. 1.01 11 900.0799
20-Jun-06