Section 2: Installation And Equipment Setup; Connections - Honeywell HEGS5BLX User Manual

INSTALLATION AND EQUIPMENT SETUP
2.1

CONNECTIONS

A terminal block is provided for connection between the HEGS5BLX keyboard controller and peripheral
equipment. A 6-conductor crossover cable is provided for connection between the HEGS5BLX and the
terminal block. Plug one end of the crossover cable into the connector on the back of the HEGS5BLX
and the other end into the jack on the terminal block.
Power Supply
COM1 (RS485 output port)
COM2 (RS232 serial port)
Rev. 1.01
SECTION 2:
Description
Connect to power supply, part number 849193-0089,
provided with the keyboard.
RS485 D+and D- (Not Used)
RS232 RX and TX
GND
+12VDC
RS-485 (D-) - COM1
RS-485 (D+) - COM1
2
RS-232 (TX) - COM2
RS-232 (RX) - COM2
900.0799
20-Jun-06