Honeywell HEGS5BLX User Manual page 16

3.1 CONTROLS AND LCD DISPLAY, CONTINUED
ID Icon
Refer to
12 Description by
Mode
Refer to
13 Description by
Mode
Refer to
14 Description by
Mode
15
16 AUX Auxiliary
17 User 3 / 4
Rev. 1.01
Usage
Auxiliary:
Sequence
Auxiliary:
Auxiliary:
The DVR key functionality is dependent on the VideoBloX
software configuration.
Press the DVR key to place the system in Device/DVR
•
mode. The DVR LED lights solid. Continue pressing
the DVR key to scroll through the available devices
(DVR, VCR, MUX). When the desired device type is
DVR displayed, enter the device # and then press Enter or
press the + and – keys to scroll through the available
devices of that type.
• The device functions available are aligned with the
DVR key.
To exit this mode press a different mode key such as
•
camera, monitor, etc. (LED will not be lit.)
Used to access PTZ or Device/DVR Auxiliary functions.
The functionality is dependent on the device database
selected or the PTZ protocol selected.
• Press this key once to perform a single auxiliary
command. (LED will blink until command is
performed).
Press this key twice to lock the controller in Auxiliary
•
mode. (LED will remain lit.)
To exit Auxiliary mode, press the key again (LED will
•
not be lit.)
Users 3 and 4 are defined in the VideoBloX Configuration
Software under the User Tab (Configurable Keys) or the
Keyboards Tab (Configurable Keys). The programming in
the Users tab has priority over the Keyboards tab.
Pressing User 3 / 4 triggers the sequence or group
assigned to User 3. Pressing Alt+User 3 / 4 triggers the
sequence or group assigned to User 4.
Description
CLR Clear. Used to exit menus, clear
Normal: an alphanumeric entry, abort an
operation.
DVR: Frame advance
Auxiliary 6
SEQ Places the controller in Sequence
Mode. Sequences are
Mode programmed in the VideoBloX
Configuration software.
Forward/Fast Forward (Alt +
/
DVR:
/
Auxiliary 7
Alm
Normal: Alarm Acknowledge
Ack
DVR: Record
Auxiliary 8
6
)
900.0799
20-Jun-06