Modes Of Operation; Camera Operation Mode - Honeywell HEGS5BLX User Manual

3.3 LOGIN/LOGOUT, CONTINUED
Logout
If you are logged into the system, press the soft key that corresponds to Login to log
out. The display returns to the Login screen.
Please Login
Login
3.4

MODES OF OPERATION

After the operator has logged in, he/she can change the mode of operation by pressing
the required mode function key.
Login (Logout)
Camera
Monitor
DVR
Sequence

3.4.1 Camera Operation Mode

When in "Camera" mode, select a camera value by pressing the corresponding numbers
on the numeric keypad and then pressing Enter. The camera value selected is switched
to the currently selected monitor. The + (Next) and – (Previous) keys may be used to
step forwards or backwards through the various cameras in the system.
Should the camera on the currently active monitor be equipped with pan, tilt, and zoom
(PTZ) features, then the joystick may be used to control the pan and tilt. Move the
joystick left and right for pan movement and up and down for tilt movement. Rotate the
joystick knob clockwise or counterclockwise for lens zoom in and zoom out functions.
For focus and iris functions, use the following keys:
Rev. 1.01
⏐
F1
Iris Open
Iris Close
Auto Iris
+
Focus Near
Focus Far
10 900.0799
20-Jun-06