Tftp; Http & Https - Cisco SPA Phones User Manual

4.2.3.1 DHCP
1. Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically
instruct phones with the URL for auto provisioning. For more information refer to
your router documentation or contact your network administrator.
2. Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has
been initiated by user. DHCP server will instruct the phone where from to pickup
appropriate configuration file. If everything is done as above described, you should
have successfully registered your phone to PBXware. Dial *123 to verify registration.
TFTP or HTTP & HTTPS
4.2.3.2
1. Login to phone web administration interface
If there is no DHCP in your network, you can still auto provision your Cisco SPA phone.
Please refer to your Cisco SPA phone model User Guide for instruction about setting
static IP address. After you configure your Cisco SPA phone to use a static IP address,
continue with the following steps.
Open a new browser window and enter your phone IP address in order to access
the phone web administration interface login screen. Example:
http://192.168.1.22
Login to the phone web administration interface with your username and password.
Please note, factory default login details are username: admin and password:
admin.
Click on Admin Login and then on Advanced.
Click on Provisioning tab.
You can use TFTP or HTTP & HTTPS protocols in order to Auto Provision your
Cisco SPA phone.
Choose which protocol you want to use:
-

TFTP

- HTTP & HTTPS
4.2.3.2.1 TFTP
In the Profile Rule field enter tftp:// followed by Hostname or IP Address,
followed then by /$MA.cfg.
© 2003 - 2012 Bicom Systems
Registering Phone 13