Cisco SPA Phones User Manual page 18

16 Cisco SPA Phones User Guide
Login to phone web administration interface with your username and password.
Please note, factory default login details are username: admin and password:
admin.
Click on Admin Login and then on Advanced.
Click on Provisioning tab.
Profile Rule
In the Profile Rule field enter the Hostname.
- Example for the Hostname: bicomsystems.com
Make sure you replace Hostname from this example with your PBXware
Hostname.
Make sure DNS server is configured to automatically route registration request to a
PBXware which is actually under another domain name, example:
newbicomsystems.com.
Click on Submit All Changes and wait 35 seconds. The phone may reboot.
Reboot the phone.
For Cisco SPA phone mode SPA301 lift the handset and enter ****, enter
73266 and press #, the phone will be rebooted.
For Cisco SPA phone models SPA502G, SPA504G, SPA508G, SPA509G press the
Setup button, scroll to Reboot and press select, the phone will be rebooted.
For Cisco SPA phone model SPA501G press the Setup button, enter 73266, then
press #, the phone will be rebooted.
For Cisco SPA phone model SPA525G press the Setup button, scroll to Reboot
and press select, the phone will be rebooted.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial
*123 to verify registration.
© 2003 - 2012 Bicom Systems