Cisco SPA Phones User Manual page 4

Table of Contents

Cisco SPA Phones User Guide

you should check. Although different phone models can have exactly the same

requirements and installation procedure, phone models can also have significantly

different requirements and installation procedure, so that ignorance of your own

model may result in the inability to successfully set up your phone.

2. Phone firmware

Make sure that your phone is loaded with appropriate firmware version.

model

SPA301

SPA501G

SPA502G

SPA504G

SPA508G

SPA509G

SPA525G

For Cisco SPA phone model SPA301 lift the handset and enter ****, enter 150

and press #, the phone firmware (software version) will be recited.

For Cisco SPA phone models SPA502G, SPA504G, SPA508G, SPA509G press the

Setup button, scroll to Product Info and press select, scroll to Software

Version, the firmware version number is displayed.

For Cisco SPA phone model SPA501G press the Setup button, enter 150, then

press #, the firmware version will be recited.

For Cisco SPA phone model SPA525G press the Setup button, scroll to Status

and press Select, select Product Information, scroll to Software Version,

press Select.

3. DHCP server

Fully configured and operational DHCP server.

4. PBXware version

In order to find out the PBXware version, please login to PBXware and navigate to

Settings: About. On the top of "About" page is a code similar to this one "PBXware

Edition: Business, Release: 3.1 (041373f), Running: 1.4.24-gc-75ee203", where

firmware

7.4.9c

Table of Contents

Spa301 Spa508g Spa501g Spa509g Spa502g Spa525g ... Show all