Do Not Disturb - Obihai OBi100 Administration Manual

Nordic Style Feature Invocation
In the above description of call waiting, 3-way calling, and call transfer operations, the way the features are invoked is
referred to as N. America style. In Nordic regions (such as Sweden, Norway), the same features are invoked by hook flashing
followed by a digit 0, 1, 2, 3, or 4 to more precisely control which operations to apply to the calls. For these regions, the
phones may also be equipped with an R button for hook flashing. The commands issued to the OBi are referred to as R0, R1,
R2, R3, R4, and R5. Here is a summary of the operations:
Commands Operations
R0 Reject the 2
st
R1 End the 1
st
R2 Hold 1 call. Resume or answer the 2
calls)
R3 Keep the 1
(conference)
R4 Transfer 2
To select the Nordic style of feature invocation, set the parameter PHONE Port::CallCommandSignalMethod to "Nordic
Regions (R1, R2, ...)". The default is: N. America.
Caller ID Block (Anonymous Calling)
Caller ID Block allows you to mask your name and number information from appearing on the phone you are calling. To use
Caller ID Block for one call only, dial *67 and then the destination number. To use Caller ID Block on a persistent basis, dial
*81 from the handset attached to the OBi. All calls will use the Caller ID Block feature until you cancel the Caller ID Block.
To cancel Caller ID Block, dial *82 from the handset attached to the OBi.
Note: This service feature requires ITSP support. While most ITSP services support this service feature, at present, Caller ID
Blocking is NOT available with Google Voice service.
Automatic Call Back (Call Return)
Automatic Call Back, also called Call Return can be used to call back the last caller who called you without actually dialing
their number. To use Automatic Call Back, from the phone attached to the OBi, dial *69. The OBi will then attempt to use
the previous callers Caller ID information to make the call.
Repeat Dialing
Repeat Dialing is useful when you call a number that is busy and you want to keep trying so that your call gets through
when the far end is available. Repeat dialing will continue to try the last number until the OBi device can complete the call
or Repeat dialing is cancelled. To enable repeat dialing, from the phone attached to the OBi, dial *05 and hang up. To
cancel repeat dialing, from the phone attached to the OBi, dial *06.
Anonymous Call Block
Anonymous Call Block allows you to block calls from incoming callers when there is no identifying caller ID name or number.
Incoming calls will be presented with a busy signal. To use Anonymous Call Block, from the phone attached to the OBi, dial
*77. To cancel Anonymous Call Block, from the phone attached to the OBi, dial *87.

Do Not Disturb

nd
incoming call
call. Resume or answer the 2
st
call. Resume or answer the 2
nd st
call peer to the 1 call peer
Copyright 2010-2013 Obihai Technology, Inc.
Scenarios
st
1 call connected, 2
nd st
call 1 call connected, 2
hold or ringing
nd st
call (swap 1 call connected, 2
hold or ringing
nd st
call 1 call connected, 2
hold or ringing
st
1 call connected, 2
hold or connected
nd
call ringing
nd
call on
nd
call on
nd
call on
nd
call on
22