Network Settings - Obihai OBi100 Administration Manual

System Management Features of the OBi Device

Network Settings

This section applies to OBi100/OBi110 only. For OBi2 Series and OBi3 Series models, please refer to the section WAN
Settings.
Network Settings Parameter Guide:
Parameter
Internet Settings
AddressingType
IPAddress
SubnetMask
DefaultGateway
DNSServer1
Description
The method used for assigning IP address, subnet mask, default gateway, etc.,
to the device. Available choices are:
DHCP: IP address, default gateway, etc. are assigned by DHCP Server. these
these
Static: IP address, default gateway, etc. are taken from the manually
configured values.
The IP address to assign to the device when AddressingType is set to Static.
The subnet mask to use when AddressingType is set to Static.
The default gateway IP address to assign to the device when AddressingType is
set to Static.
IP address of the first DNS server to use, in addition to the ones obtained from
the DHCP server when DHCP is also enabled. If AddressingType is set to Static,
the device only uses DNSServer1 and DNSServer2 for DNS lookup. It will try up
to 5 DNS servers when attempting to resolve a domain name. DNSServer1 and
Copyright 2010-2013 Obihai Technology, Inc.
Default
Setting
DHCP
81