OBiTALK Service Settings
OBiTALK Service Settings Parameter Guide:
Parameter
Enable
LocalPort
TryMultiplePorts
DisplayName
DigitMap
InboundCallRoute
RingProfile
CodecProfile
Description
Enable the OBiTALK Service (the built-in free voice
service that comes with every OBi Device)
The UDP or TCP port used by device to send and listens
for OBiTALK messages
Enable the unit to try a few random UDP ports until it
can successfully join the OBiTALK network
Display name to identify the subscriber, for the purpose
of displaying a Caller ID Name on the recipient's device
Digit map to restrict numbers that can be dialed or
called with this service. See OBi Call Routing and Digit
Map Section for a description of the syntaxes for
specifying a Digit Map.
Routing rule for directing incoming calls on this service.
The default rule is to send all incoming calls to the
PHONE port (ph). See OBi Call Routing and Digit Map
Section for a description of the syntaxes for specifying
this parameter
Select a Ring Profile to ring the PHONE port with when
an incoming call is routed to the PHONE port. Choices
are A, or B
Select a Codec Profile to be used for all calls on this
service. Choices are A, or B.
Copyright 2010-2013 Obihai Technology, Inc.
Default Setting
Yes
10000
No
(<ob>xxxxxxxxx|obxxxxxxxxx)
Ph
A
A
119