Codec Profile Features Of The Obi Device - Obihai OBi100 Administration Manual

RingIndicationDelayTime
RingTimeout
RingerImpedance

Codec Profile Features of the OBi Device

There are two Codec Profiles available on OBi devices. They are selectable Per Trunk (SP1/SP2/SP3/SP4/OBiTALK). To select
a codec as the preferred codec in this profile, set the priority of that codec to be highest among all the enabled codecs in
this profile. Each of the SP1, SP2, SP3, SP4, and OBiTALK services can be assigned a codec profile in its corresponding
configuration. The codec list to use when setting up a call on the underlying service is formed from the list of enabled
codecs in the chosen profile and ordered according to the assigned priorities in the profile.
The codecs available on the OBi100/OBi110 and on the OBi200/OBi202/OBi300/OBi302 are slightly different. Below screen
shots show the Codec Profile web page for each device model.
Time in ms between ring signal validated and valid ring signal indicated
Time (ms) elapsed since last ring threshold crossing to declare ring is over
Synthesized ringer impedance to meet specification in countries, such as
Poland, South Africa, and Slovenia
Copyright 2010-2013 Obihai Technology, Inc.
512
1408
High
156