Updating Firmware - Obihai OBi100 Administration Manual

Firmware: Local OBi Device Update and Management

Updating Firmware:

You may upgrade the firmware for your OBi device from the device configuration web page. The firmware file with which
you want to upgrade the device must be stored locally on a computer from which you can access with a web browser.
Follow these steps to upgrade:
Step 1: Select the, "System Management – Device Update" menu on the side panel of the web page.
Step 2: Specify the path of the firmware file by clicking the, "Select file to upgrade firmware" box or pressing the, "Browse"
button in the Firmware Update section of the page. This will present a file browser window where you can navigate to and
select the firmware file.
Step 3: Upon selection of the firmware file, press the "Update" button to start the upgrade process.
The entire process will take about 30 seconds to complete. Note that you MUST NOT disconnect the power from the device
during this procedure. If the new firmware is upgraded successfully, the OBi device will reboot automatically to start
running the new firmware. Otherwise the page will show an error message explaining why upgrade has failed.
Copyright 2010-2013 Obihai Technology, Inc. 43