Video Overlay Window - Cisco 6000 series Configuration Manual

Video Overlay Window

Table 4-4
Option
Iris Speed
Day Night Filter Area
Filter Type
Day to Night Threshold If the Switch Mode option is set to Auto, choose the value that specifies the
Night to Day Threshold If the Switch Mode option is set to Auto, choose the value that specifies the
Enable Night Vision
Schedule
Start Time
End Time
Video Overlay Window
The Video Overlay window provides options for configuring overlay information that appears on the
video image in the Camera Video & Control window.
To display the Video Overlay window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
4-8
Camera Window Options (continued)
Description
This option is available only for the 6000P IP camera.
Note
Specifies the speed at which the iris reacts to changes in the lighting
conditions. Higher values specify a quicker reaction, and lower values
specify a slower reaction.
Default value is 1.
Choose the day/night mode for the IP camera:
• Day—IP camera always remains in day mode.
• Night—IP camera always remains in night mode.
• Auto—IP camera automatically switches between day and night modes
based on the lighting condition threshold that you specify.
relative light threshold at which the IP camera switches from day to night
mode. A lower value designates that the IP camera switches from day to
night mode in brighter conditions. A higher value designates that the IP
camera switches modes in darker conditions.
The default value is 10.
relative light threshold at which the IP camera switches from night to day
mode. A lower value designates that the IP camera switches from night to
day mode in darker conditions. A higher value designates that the IP camera
switches modes in lighter conditions.
The default value is 15.
Check this check box if you want to configure the times that the camera
switches to and from night mode.
Enabling this schedule disables the Filter Type option.
If you configure a schedule, make sure that the time on the IP camera
Note
is set correctly.
Enter the time, in 24 hour format, that the camera enables its night filter.
Enter the time, in 24 hour format, that the camera disables its night filter.
Chapter 4 Feature Setup
OL-28691-01