Camera Window - Cisco 6000 series Configuration Manual

Camera Window

Table 4-3
Option
Analog Video Area
Note
Enable Analog Video
Port
Camera Window
The Camera window provides options for making certain video adjustments, exposure control, and
configuring the operation of the IP camera day and night filters.
The IP camera day and night filters allow the IP camera to optimize its video image for various lighting
conditions. When the IP camera uses its day filter, it is operating in day mode. In this mode, the camera
displays video images in color. When the IP camera uses its night filter, it is in night mode. In this mode,
the camera displays video images in black and white.
To display the Camera window, perform the following steps:
Procedure
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Feature Setup to expand the menu.
From the Feature Setup menu, click Camera.
Step 3
The Camera window appears. If you change any options in this window, you must click the Save
Settings button to save the changes. If you do not click this button, changes are not retained when you
exit the window. Save Settings appears at the bottom of the window. You might need to scroll down to
it.
Table 4-4
Table 4-4
Option
Video Adjustments Area
White Balance Mode
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
4-6
Streaming Window Options (continued)
Description
This option applies to the primary stream only.
Check this check box if you if you want the IP camera to enable analog video
for installation purposes. To enable analog video, the following settings are
required:
The primary video stream frame rate must be set to 15 fps or lower.
•
The secondary video stream must be disabled.
•
describes the options in the Camera window.
Camera Window Options
Description
Choose one the following White Balance modes from the drop-down list:
Manual—Choose this option if you want to set the white balance by
•
setting RGain (Red Gain) and BGain (Blue Gain) manually.
• Auto—White balance is automatically set by camera, which is suitable
for most conditions.
The default setting is Auto.
Chapter 4 Feature Setup
OL-28691-01